Soundsystem


The centrepiece of 33 is a phenomenally impressive soundsystem, created in association with MasterSounds. At its core are a set of PMC MB2SE speakers - one of the best transducers ever made to convey emotion through music – powered by a Bryston 4B3 amp and supported by a Bryston BP-20 preamp. The system is designed by Grammy-award winning record producer Steve Levine – whose credits include Culture Club, The Beach Boys, and Motörhead – in an acoustically-treated space as perfect as a state of the art recording studio.

Weekly ‘selector’ sessions showcasing the exploratory side of a DJ’s record collection, album listening parties, artist takeovers and radio broadcasts will all utilise this world-class sound system using MasterSounds SL Silver turntables with Rega RB-202 arms rewired with ultra-pure Cardas Litz copper for an open and transparent sound, limited edition Radius 4V mixer, one of only three silver models ever produced and a TRBxM 'Total Resonance Blocking' Turntable Isolation System, designed to offer a no-compromise turntable isolation solution.


First Floor DJ Equipment:


MasterSounds SL Silver turntables, modified with a pair of new Rega RB-202 arms rewired with ultra-pure Cardas Litz copper for an open and transparent sound

– Limited edition Radius 4V mixer, one of only three silver models ever produced.

TRBxM 'Total Reasonance Blocking' Turntable Isolation System, designed to offer a no-compromise turntable isolation solution

Audio Technica XP-5 Stylus (pair)

Master Sounds turntable weights

First Floor Sound System


PMC MB2 SE Speakers.
Finish: Walnut
Crossover Frequency:380Hz - 3.8kHzDimensions:(H) 870mm x (W) 380mm x (D) 535mm (Stand (H)377 (+ 50mm spikes) x (W)374 x (D)502)Drive Units:LF - PMC 12” 310mm Radial™ driver
HF - 27mm SONOLEX™ soft dome Ferrofluid cooled
MF - PMC75 SE - 75mm soft domeEffective ATL™ Length:3m 10ftFrequency Response:20Hz-25kHzImpedance:8 Ohm nominalInput Connectors:3 pairs 4mm sockets (Tri-Wire or Tri-Amp)sensitivity:90dB 1w 1mWeight:58kg (stand 17kg)

BRYSTON 4B Cubed Amplifier

Inputs: 2x Balanced Inputs (XLR or TRS), 2x Single Ended Inputs (RCA)

Power Capabilities:
300W into 8Ω
500W into 4Ω
900W into 8Ω (Bridged Mono)
Features:

Active extremely low distortion input buffer
Balanced and Single Ended audio inputs
Selectable gain at 23 or 29dB
Regulated power supplies to all voltage gain stages
Independent power supplies for each channel
Convection cooled and housed in a fully aluminum chassis.
No fans or other moving parts
Bridging switch configures amplifier into a single 900W Channel

Specifications:

Harmonic Distortion: ≤ .005% from 20Hz to 20kHz at 300W
Noise: ≤ -119dB @ full bandwidth
Slew Rate: >60V/µS
Power Bandwidth: <1Hz to >100kHz
Damping Factor: >500 at 20Hz (8Ω)
Switchable Gain: 23dB or 29dB


BRYSTON BP-20 Pre-Amplifier

Frequency Response: 20Hz-20kHz +/- .05dB
Maximum Output: 15 volts unbalanced, 30 volts balanced
IMD/THD: <0.0015% at 3 volts out

Sensitivity:

Balanced inputs: 1.00V
UnBalanced line level inputs: 500 mV

Rated Noise:

-100dB (Ref. 500mV unbalanced input, 20-20kHz)
-103dB (Ref. 1 volt balanced input 20-20kHz)

XLR Connector Pin out (Balanced I/O): Pin 1 ground, pin 2 positive, pin 3 negative

Features:

2 pair balanced female XLR inputs
1 pair balanced male XLR outputs
5 pair RCA inputs
4 pair RCA + 1 pair phono inputs (BP-20/25P and BP-
20/25MC only)
4 pair RCA + 2 SPDIF digital inputs (BP20/25 DA only)
2 pair RCA outputs
1 tape loop

Dimensions:

Standard version: 17” x 1.75” x 11”
Weight: 17 lbs (7.5 kg)


MPS-1 Power supply specifications:

Dimensions: 7.75" x 4.525" x 2.36"h
Weight: 2.6 lb. (1182g)
Electrical: 120VAC/60Hz/29VA, Fuse: 315mA/250V time lag
230VAC/50Hz/29VA, Fuse: 160mA/250V time lag
240VAC/50Hz/29VA, Fuse: 160mA/250V time lag
Output: +/-28VDC @ 350mA (56VDC @ 700mA)


Contact - For bookings and general enquiries please drop the team a line at info[at]33oldhamstreet.com or call 0161 832 1299.